Har du ikke hele betegnelsen og fabrikatet?
Nedenstående siger det er noget med belægningen, altså coatningen.
Åh hvor der mange sjove ting i sådan noget Chinglese.
![Cheesy :D](https://frylundsmaskinforum.dk/fagteori/Smileys/default/cheesy.gif)
Notice:
1.The tungsten caebide inserts shall not be collided or dropped on the ground and must be handled with care.
2.Before installing the tungsten caebide inserts, the performance and purpose of the
saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
3.After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
4.When using, do not exceed the specified high speed
5.When the tungsten caebide inserts are not used, hang the blade vertically on the dry shelf.https://www.bwintools.com/sale-35519421-tpkn-1603-2204-tungsten-carbide-inserts-pdr-cnc-milling-inserts.html